Waters Network Systems GSM2108 Operating Manual page 117

Command Syntax
duplex duplex <range>
<auto|10half|10
full|100half|100
full|1gfull>
Show conf show conf
Show detail- show detail-
counter counter <#>
Show sfp show sfp
<port>
Show simple- show simple-
counter counter
Show status show status
QoS
Set advance- set advance-
layer4 layer4 <port-
range> <#>
<tcp/udp port>
<default>
<match>
Set default set default
<class>
Set diffserv set diffserve
<ds-range>
Waters Network Systems
Description
duplex mode of all ports
Used to display each port's
configuration regarding state,
speed-duplex and flow control
Used to display the detailed
counter number for port traffic
Used to display the SFP
module information
Used to display the summary
counter for each port's traffic
Used to display the port's
current status
Used to set class of ports on
advanced mode for Layer 4
QoS
Used to set priority class of the
packets that QoS doesn't affect
Used to set class of ports on IP
DiffServe QoS
User's Manual
GSM-2108/GSM-1008SFP
Argument
7, available from 1 to
8
<port-speed>: auto:
set auto-negotiation
mode
10half: set
speed/duplex 10M
Half
10full: set
speed/duplex 10M
Full
100half:set
speed/duplex 100M
half
100full: set
speed/duplex 100M
full
1Gfull: set
speed/duplex 1G full
None
<#>: port, available
from 1 to 8
<port>: SFP port,
available 7-8
None
None
<port-range>:port
range, syntax 1, 5-7,
available from 1 to 8
<#>: special
UDP/TCP port
selection, range: 1-10
<tcp/udp port range>:
0-65535
<default>: default
class (all other
TCP/UDP ports)
1:high, 0:low
<match>:special
TCP/UDP class.
1:high, 0:low
<class>: class of
service setting 1:high,
0:low
<ds-range>: dscp
field, syntax 1, 5-7,
Page 117
Possible
Value
<port-speed>:
auto, 10half,
10full, 100half,
100full, 1Gfull
None
<#>: 1~8
<port>: 7, 8
None
None
<port –range>:
1 to 8
<#>: 1-10
<tcp/udp port
range>:0-
65535
<default>: 1 or
0
<match>: 1 or 0
<class>: 1 or 0
<ds-range>: 0
to 63