System Information - Waters Network Systems GSM2108 Operating Manual

5.2

System Information

Function name:
System Information
Function description:
Show the basic system information.
Parameter description:
Model name:
The model name of this device.
System description:
Describes the device. "L2 Managed Switch".
Location:
The location where this switch is being used. User-defined.
Contact:
For the purpose of managing and maintaining the device, enter the contact person and phone
to be used for help. You can configure this parameter through the device's user interface or
SNMP.
Device name:
The name of the switch. User-defined. Default is GEL2-SW8.
System up time:
The time accumulated since this switch was powered up. The format is day, hour, minute and
second.
Current time:
Show the system time of the switch. The format: day of week, month, day, hours: minutes:
seconds, year. For instance, Wed, Apr. 23, 12:10:10, 2004.
BIOS version:
The version of the BIOS.
Firmware version:
The firmware version.
Hardware-Mechanical version:
The version of Hardware and Mechanical. The figure before the hyphen is the version of
electronic hardware; the one after the hyphen is the version of mechanical.
Serial number:
The serial number is assigned by the manufacturer.
Host IP address:
The IP address of the switch.
Host MAC address:
It is the Ethernet MAC address of the management agent in this switch.
Waters Network Systems User's Manual
GSM-2108/GSM-1008SFP
Page 25