Commands Of Cli - Waters Network Systems ProSwitch 2800M Operating Manual

6.2

Commands of CLI

To see the commands of the mode, please input "?" after the prompt, then all commands will be
listed in the screen. All commands can be divided into two categories, including global commands and
local commands. The following global commands can be used in any mode:

Exit

End

Help

History

Logout

Save start

Save user

Restore default

Restore user
Command instructions residing in the corresponding modes are local commands. The same commands
can be used in different modes and will perform a different function resulting in totally different information.
For example, show in IP mode displays the IP information; however, in system mode, it will display the
system information.
Waters Network Systems
Figure 6.2 – CLI Commands
2800M/MR User's Manual Page 120