Waters Network Systems GSM2108 Operating Manual page 119

Command Syntax
Show show
Reboot
Reboot reboot
SNMP
Disable disable set-
ability
disable snmp
Enable enable set-
ability
enable snmp
Set set get-
community
<community>
set set-
community
<community>
set trap <#>
<ip> [port]
[community]
show show
STP
Mcheck mcheck
<range>
Disable disable
Enable enable
Set config set config
<bridge
priority> <hello
time>
<max.age>
<forward
delay>
Waters Network Systems
Description
Used to display the information
of the mode you have chosen
Used to reboot the switch
Disable used in this mode will
deactivate SNMP or set-
community
Enable used in this mode will
activate SNMP or set-
community
Set used in this mode is used to
set up get-community, set-
community, trap host IP, host
port and trap-community.
Used to display the
configuration of SNMP
Used to force the port to
transmit RST BPDUs
Used to disable the STP
function
Used to enable the STP
function
Used to set the parameters of
STP
User's Manual
GSM-2108/GSM-1008SFP
Argument
<tos-range>: tos
precedence field,
syntax 1, 5-7,
available from 0 to 7
<class>: classof
service setting.
1:high, 0:low
None
None
None
None
<#>: trap number
<ip>: IP address or
domain name
<port>: trap port
<community>:trap
community name
None
<range>: syntax 1, 5-
7, available form 1 to
8
None
None
<bridge priority>:
priority must be a
multiple of 4096,
available from 0 to
61440
<hello time>:
available from 1 to 10
<max.age> :
available from 6 to 40
<forward delay>:
available from 4 to
30. Note: 2*(Forward
delay -1)>=MaxAge
Max Age> =2*(Hello
Page 119
Possible
Value
to 7
<class> : 1 or 0
None
None
None
None
<#>: 1 to 6
<port>:1~6553
5
None
<range>: 1 to 8
None
None
bridge priority>:
0 to 61440
<hello time>: 1
to 10
<max.age> : 6
to 40
<forward
delay>: 4 to 30