Detail Counter - Waters Network Systems GSM2108 Operating Manual

Function name:
Simple Counter
Function description:
Displays the summary counting of each port's traffic, including Tx Byte, Rx Byte, Tx Packet, Rx
Packet, Tx Collision and Rx Error Packet.
Parameters description:
Tx Byte:
Total transmitted bytes.
Rx Byte:
Total received bytes.
Tx Packet:
The counting number of the packets transmitted.
Rx Packet:
The counting number of the packet received.
Tx Collision:
Number of collisions transmitting frames experienced.
Rx Error Packet:
Number of bad packets received.

5.8.4 Detail Counter

The function of the Detail Counter is to collect information and provide the counting for the
traffic of the port, whether the packet is good or bad.
In Figure 5.14, the counter is displayed one port at a time. To see another port's counter, pull
down the Select list. The figures for the port you have chosen will be displayed.
Each data field is 20-digits. If the counting overflows, the counter will be reset and counting will
be restarted. The data is updated based on the time interval defined by the user. The valid
range is three to ten seconds. The refresh interval is used to set the update frequency. Default
update time is three seconds.
Waters Network Systems User's Manual
GSM-2108/GSM-1008SFP
Page 40