Port Configuration - Waters Network Systems GSM2108 Operating Manual

Vcc:
Displays the working DC voltage of SFP module.
Mon1(Bias) mA:
Displays the Bias current of SFP module.
Mon2(TX PWR):
Displays the transmit power of SFP module.
Mon3(RX PWR):
Displays the receiver power of SFP module.

5.8.2 Port Configuration

Port Configuration is used to modify the setting by port. This function allows set and reset the
functions described below.
Function name:
Port Configuration
Function description:
Used to set the operation mode of each port. The switch supports three parameters for each port:
State
Mode
Flow control.
Parameter description:
State:
The communication capability of the port is Enabled or Disabled. When enabled, traffic can be
Waters Network Systems
Figure 5.12 – Port Configuration
User's Manual
GSM-2108/GSM-1008SFP
Page 38