Waters Network Systems GSM2108 Operating Manual page 112

Command Syntax
Set applicant set applicant
<range>
<normal|non-
participant>
Set registrar set registrar
<range>
<normal|fixed|
forbidden>
Set restricted set restricted
<range>
<enable|
disable>
Set timer set timer
<range> <join>
<leaveall>
Show config show config
Show counter show counter
Show group show group
Waters Network Systems
Description
registrar mode of an existing
GVRP group per port can be
changed.
Used to set default applicant
mode for each port
Used to set default registrar
mode for each port
Used to set the restricted mode
for each port
Used to set GVRP join time,
leave time and leaveall time for
each port.
To display the GVRP
configuration
Used to display the counter
number of the port
Used to display the GVRP
groups
User's Manual
GSM-2108/GSM-1008SFP
Argument
group you have
created using the
VID. Available range
1 to 4094
<range>:port range,
syntax 1, 5-7,
available from 1 to 8
<normal>: set
applicant as normal
mode
<non-participant>: set
applicant as non-
partipant mode
<range>:port range,
syntax 1, 5-7,
available from 1 to 8
<normal>: set
registrar as normal
mode
<fixed>: set registrar
as fixed mode
<forbidden>: set
registrar as forbidden
mode
<range>: port range,
syntax 1, 5-7,
available from 1 to 8
<enable>: set
restricted enabled
<disabled>: set
restricted disabled
<range>:port range,
syntax 1, 5-7,
available from 1 to 8
<join>: join timer,
available from 20 to
100
<leave>: leave timer,
available from 60 to
300
<leaveall>: 1000 to
5000
Leave time must be
equal to or greater to
the join time
None
<port>: port number
None
Page 112
Possible
Value
1~4094
<range> : 1 to
8
<range>: 1 to 8
<normal|fixed|
forbidden>:nor
mal or fixed or
forbidden
<range>: 1 to 8
<enable|disable
>: enable or
disable
<range> 1 to 8
<join>: 20 to
100
<leave>: 60 to
300
<leaveall>:
1000 to 5000
None
<port>:
available from
1 to 8
None