Configuration Example For Mpls Exp-Based Frame Relay Pvc Selection; Verifying And Monitoring Frame Relay Pvc Selection - Cisco 10000 Series Configuration Manual

Frame Relay PVC Selection

Configuration Example for MPLS EXP-Based Frame Relay PVC Selection

Example 19-8
The sample configuration adds PVCs 101 and 100 to the PVC bundle named router2 and configures the
MPLS EXP levels for each PVC bundle member.
Example 19-8 Configuring MPLS EXP-Based Frame Relay PVC Selection
interface serial8/0/0

Verifying and Monitoring Frame Relay PVC Selection

To verify and monitor the configuration and operation of Frame Relay PVC selection, enter any of the
following commands in privileged EXEC configuration mode:
Cisco 10000 Series Router Quality of Service Configuration Guide
19-50
pvc 201
class premium
dscp 31-24
protect group
pvc 202
class basic
dscp other
protect group
shows how to configure MPLS experimental (EXP)-based Frame Relay PVC selection.
encapsulation frame-relay
mpls label protocol ldp
tag-switching ip
frame-relay vc-bundle router2
pvc 101
exp 0,2,7
pvc 100
exp other
Chapter 19 Configuring Quality of Service for PVC Bundles
OL-7433-09