Verifying Multi-Level Priority Queues: Example - Cisco 10000 Series Configuration Manual

Verification Examples for Priority Queues

Verifying Multi-Level Priority Queues: Example

The following example shows sample output from the show policy-map interface command.
Router# show policy-map interface
Cisco 10000 Series Router Quality of Service Configuration Guide
8-12
Output queue: 0/64; 0/0 packets/bytes output, 0/0 drops
Bandwidth : 2000 kbps (Weight 25)
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/256; 0/0 packets/bytes output, 0/0 drops
Serial2/1/0
Service-policy output: P1
Queue statistics for all priority classes:
.
.
.
Class-map: Gold (match-all)
0 packets, 0 bytes/*Updated for each priority level configured.*/
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 2
Priority: 0 kbps, burst bytes 1500, b/w exceed drops: 0
Priority Level 2:
0 packets, 0 bytes
Chapter 8 Prioritizing Services
OL-7433-09