Configuring Frame Relay Bundle Members - Cisco 10000 Series Configuration Manual

Frame Relay PVC Selection
Command
Step 1
Router(config)# interface serial
slot/module/port.channel:controller-number
Step 2
Router(config-if)# frame-relay vc-bundle
vc-bundle-name
Step 3
Router(config-fr-vcb)# pvc dlci [vc-name]
Configuration Example for Adding a PVC to a Frame Relay PVC Bundle
Example 19-4
Bronze (DLCI 100) is added to the Frame Relay PVC bundle named Business.
Example 19-4 Creating a PVC Bundle Member
Router(config-if)# frame-relay vc-bundle Business
Router(config-fr-vcb)# pvc 100 Bronze

Configuring Frame Relay Bundle Members

You can configure a Frame Relay bundle member directly or by associating a Frame Relay map class to
the bundle member. The parameter values that you apply directly to the bundle member supersede the
parameter values that you apply using a map class.
To apply parameters to a PVC bundle, perform either of the following configuration tasks:
•
•
Configuring a Frame Relay Bundle Member Directly
You can configure a Frame Relay bundle member directly or by associating a Frame Relay map class to
the bundle member. The parameter values that you apply manually to the bundle member supersede the
parameter values that you apply using a map class.
Note We recommend that you configure a PVC bundle on the peer router, especially for applications that rely
on communications on the same PVC (for example, TCP header compression).
Cisco 10000 Series Router Quality of Service Configuration Guide
19-44
shows how to add a PVC to a Frame Relay PVC bundle. In the example, the PVC named
Configuring a Frame Relay Bundle Member Directly, page 19-44
Configuring a Frame Relay Bundle Member Using a Map Class, page 19-48
Chapter 19
Purpose
Creates or modifies a serial interface. Enters interface
configuration mode.
slot/module/port identifies the line card. The slashes are
required.
channel: is the channel group number. The colon is required.
controller-number is the member link controller number.
Creates or modifies a PVC bundle. Enters Frame Relay VC
bundle configuration mode.
vc-bundle-name is a name you assign to the Frame Relay PVC
bundle to identify the bundle.
Creates a PVC bundle member and enters Frame Relay VC
bundle member configuration mode.
dlci is the local data-link connection identifier (DLCI).
vc-name is a name that identifies the PVC.
Configuring Quality of Service for PVC Bundles
OL-7433-09