Configuration Examples For Simultaneous Policy Maps; Configuration Example For Applying Simultaneous Policy Maps On Ethernet Interfaces And Pppoe Sessions - Cisco 10000 Series Configuration Manual

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Configuration Examples for Simultaneous Policy Maps

Virtual-Template 1
sessions per-vc limit 1000
!
interface Virtual-Template1
Configuration Examples for Simultaneous Policy Maps
This section provides the following configuration examples:
Configuration Example for Applying Simultaneous Policy Maps on Ethernet
Interfaces and PPPoE Sessions
The following configuration example shows how to create and apply simultaneous policy maps on
Ethernet interfaces and PPP sessions. The Client Configuration shows that no policies have been applied.
In the PTA Configuration, the interface policy named cbwfq_out_policy is applied to the Gigabit
subinterface Ethernet 1/0/0.2 and the session policy named police_out_policy is applied to the virtual
template named Virtual-Template1, which is in turn applied to the BBA group named VRF_1.
Client Configuration
bba-group pppoe VRF_1
virtual-template 1
sessions per-vc limit 1000
sessions per-mac limit 1000
sessions per-vlan limit 1000
!
interface GigabitEthernet8/0/0
no ip address
!
interface GigabitEthernet8/0/0.2
encapsulation dot1Q 2
pppoe enable group VRF_1
!
Interface Virtual-Template1
mtu 1492
ip address negotiated
keepalive 30
ppp max-terminate 10
ppp max-failure 10
ppp lcp delay 1
ppp pap sent-username gomer1@domain1.com password 0 gomer
Cisco 10000 Series Router Quality of Service Configuration Guide
14-14
ip unnumbered Loopback1
service-policy output pppoe_sess_output_policy
Configuration Example for Applying Simultaneous Policy Maps on Ethernet Interfaces and PPPoE
Sessions, page 14-14
Configuration Example for Applying Simultaneous Policies on 802.1Q Interfaces and PPPoE
Sessions, page 14-16
Configuration Example for Applying Simultaneous Policies on 802.1Q QinQ Interfaces and PPPoE
Sessions, page 14-17
Configuration Example for Applying Simultaneous Policies on ATM VCs and PPPoA Sessions,
page 14-17
Configuration Example for Applying Simultaneous Policies on ATM VCs and PPPoE Sessions,
page 14-18
Chapter 14
Simultaneous Policy Maps
OL-7433-09

Advertisement

Table of Contents
loading

Table of Contents