Cisco 10000 Series Configuration Manual page 738

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Frame Relay PVC Selection
Command
Step 6
Router(config-fr-vcb-vc)# precedence
{level | other}
Step 7
Router(config-fr-vcb-vc)# dscp {level |
other}
Cisco 10000 Series Router Quality of Service Configuration Guide
19-46
Chapter 19
Purpose
(Optional) Configures the precedence levels for a Frame Relay
PVC bundle member. This command configures
precedence-based PVC selection.
level specifies the precedence level or levels for this Frame Relay
PVC bundle member. Valid values are from 0 to 7.
You can configure a PVC bundle member with a single
precedence level (0), multiple individual precedence levels
(0,2,3), a range of precedence levels (0-2), multiple ranges of
precedence levels (0-2,4-5), or a combination of individual levels
and level ranges (0,1,2-4,7).
Note
This command is available when the PVC bundle match
type is set to precedence.
other specifies that this Frame Relay PVC bundle member
handles all of the remaining precedence levels that are not
explicitly configured on any other bundle members.
Critical non-IP traffic automatically uses precedence
Note
level 0.
(Optional) Configures the differentiated services code point
(DSCP) levels for a Frame Relay PVC bundle member. This
command configures DSCP-based PVC selection.
level specifies the DSCP level or levels for this Frame Relay
PVC bundle member. Valid values are from 0 to 63.
You can configure a PVC bundle member with a single DSCP
level (9), multiple individual DSCP levels (25,35,45), a range of
DSCP levels (25-35), multiple ranges of DSCP levels
(25-35,45-55), or a combination of individual levels and level
ranges (10,20,25-35,40,45-55,60).
This command is available when the PVC bundle match
Note
type is set to dscp. By default, the PVC members are
configured to reject bumping when the match-type is
dscp.
other specifies that this Frame Relay PVC bundle member
handles all of the remaining DSCP levels that are not explicitly
configured on any other bundle members.
Configuring Quality of Service for PVC Bundles
OL-7433-09

Advertisement

Table of Contents
loading

Table of Contents