Feature History For Ppp Session Queuing On Atm Vcs; Dynamically Applying Qos Policies To Ppp Sessions On Atm Vcs - Cisco 10000 Series Configuration Manual

Chapter 17 Configuring Dynamic Subscriber Services
The PPP Session Queuing on ATM VCs feature applies to both PPP terminated aggregation (PTA) and
Note
L2TP access concentrator (LAC) configurations.
Figure 17-3
Figure 17-3
Session #1
with QoS
Session #2
without QoS

Feature History for PPP Session Queuing on ATM VCs

Cisco IOS Release
Release 12.2(31)SB6

Dynamically Applying QoS Policies to PPP Sessions on ATM VCs

The router allows you to dynamically apply QoS policy maps to PPPoA and PPPoEoA sessions using
RADIUS. Although the actual configuration of the QoS policies occurs on the router, you can configure
the following attribute-value (AV) pairs on RADIUS to specify the name of the policy map to
dynamically apply to the session:
"ip:sub-qos-policy-in=<name of the QoS policy in ingress direction>"
"ip:sub-qos-policy-out=<name of egress policy>"
You define the AV-pairs in one of the following RADIUS profiles:
•
OL-7433-09
illustrates PPP session queuing on ATM VCs.
PPP Session Queuing on ATM VCs
PPPoE Session
Voice
Video
Data-premium
Class-default
More sessions with
or without QoS
Description
The PPP Session Queuing on ATM VCs feature was
introduced on the Cisco 10000 series router and
implemented on the PRE3.
User Profile—The user profile on the RADIUS server contains an entry that identifies the policy
map name applicable to the user. The policy map name is the service that RADIUS downloads to
the router after a session is authorized.
ATM VC
pppoe-Session
pppoe-Session
Another VC on same interface
Cisco 10000 Series Router Quality of Service Configuration Guide
Queuing PPP Sessions on ATM VCs
Interface with shaper
Interface without shaper
HW Interface
Required PRE
PRE3
17-51