Dynamic Bandwidth Selection Feature; Attaching Qos Service Policies; Service-Policy Command - Cisco 10000 Series Configuration Manual

Chapter 1 Quality of Service Overview

Dynamic Bandwidth Selection Feature

Cisco IOS Release: Release 12.2(16)BX
Description: The Dynamic Bandwidth Selection (DBS) feature was introduced on the PRE2 to
dynamically change ATM traffic shaping parameters based on a subscriber's RADIUS profile. This
feature is also known as Per User QoS Using AAA Policy Name.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.

Attaching QoS Service Policies

Documentation Reference:
•
•
•
•
•
•

service-policy Command

Cisco IOS Release: Release 12.0(17)SL
Description: The service-policy command was introduced on the PRE1 to attach a policy map that the
router can use to apply QoS services to inbound and outbound packets.
Cisco IOS Release: Release 12.2(15)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.3(7)XI2
Description: This command was enhanced on the PRE2 to allow you to attach a policy map to a range
of PVCs, and to a specific PVC within the PVC range.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
OL-7433-09
Chapter 4, "Attaching Service Policies"
service-policy Command, page 1-13
Attaching ATM QoS Service Policies, page 1-14
Attaching Frame Relay QoS Service Policies, page 1-14
Attaching LAC QoS Service Policies, page 1-15
Attaching Virtual LAN QoS Service Policies, page 1-15
Attaching Virtual Access Interface QoS Service Policies, page 1-15
Cisco 10000 Series Router Quality of Service Configuration Guide
QoS Features, Commands, and Changes
1-13