Verification Examples For Atm Clp-Based Wred - Cisco 10000 Series Configuration Manual

Verifying and Monitoring Layer 3 Packet Dropping

Verification Examples for ATM CLP-Based WRED

Example 11-7
CLP-based WRED is configured on a Cisco 10000 series router with a PRE3. The output shows the
threshold values configured for CLP 1.
Example 11-12 Displaying ATM CLP-Based WRED Statistics (PRE3)
Router# show policy-map policymap1
Service-policy output: policymap1
Example 11-7
is configured on a Cisco 10000 series router with a PRE2. The output shows the threshold values
configured for CLP 1.
Example 11-13 Displaying ATM CLP-Based WRED Statistics (PRE2)
Router# show policy-map policymap1
Service-policy output: policymap1
Cisco 10000 Series Router Quality of Service Configuration Guide
11-38
shows sample output for the show policy-map interface command when ATM
Class-map: class1 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: none
Queueing
Queue limit 50 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth 20% (00000 kbps)
Exp-weight-constant: 9 (1/512)
Mean queue depth: 0 bytes
clp Transmitted
pkts/bytes
0 0/0
1 0/0
shows sample output for the show policy-map command when ATM CLP-based WRED
Class-map: class1 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: none
Output queue: 0/16384; 0/0 packets/bytes output, 0/0 drops
Bandwidth : 200000 kbps (Weight 20)
Random-detect (clp-based) :
Exponential weight: 9 (1/512)
Current average queue length: 0 packets
-------------------------------------------------------------------------
ATM Min Max
CLP thres thres
----------------------------------------------------------------
0 4097 8192
1 12
Random drop Tail drop
pkts/bytes pkts/bytes
0/0 0/0
0/0 0/0
Mark Rand-Drop
probability Pkts
1/10 0
25 1/10 0
Chapter 11 Managing Packet Queue Congestion
Minimum Maximum
thresh thresh
0 0
12 25
Tail-Drop
Bytes Pkts Bytes
0 0 0
0 0 0
Mark
prob
1/0
1/10
OL-7433-09