Verification Examples For Traffic Marking - Cisco 10000 Series Configuration Manual

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Verifying Traffic Marking

Verification Examples for Traffic Marking

Example 7-14
assigned to the Gold class has the precedence bits set to 5.
Example 7-14 Verifying Marking in a Policy Map
Router# show policy-map Child
Policy Map Child
Example 7-15
hierarchical policy that is attached to PVC 5/101 on the ATM 3/0/0.3 subinterface. In the Child policy,
the Bronze class indicates to set the DSCP bits of Bronze packets to 3. The Gold class indicates to set
the IP precedence bits of Gold packets to 5.
Example 7-15 Verifying Marking in a Hierarchical Policy
Router# show policy-map interface atm 3/0/0.3
ATM3/0/0.3: VC 5/101 -
Service-policy output: Parent
Cisco 10000 Series Router Quality of Service Configuration Guide
7-38
shows how to verify marking for the traffic classes in a policy map. In this example, traffic
Class Bronze
police percent 30 6 ms 4 ms conform-action transmit exceed-action set-prep
Class Gold
police 8000 2000 4000 conform-action transmit exceed-action set-qos-transp
set ip precedence 5
shows how to verify marking on a specific interface. In this example, the QoS policy is a
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/64; 0/0 packets/bytes output, 0/0 drops
Shape : 2000 kbps
Service-policy : Child
Class-map: Bronze (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 3
Police:
600000 bps, 1536 limit, 1000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: set-prec-transmit 2
violated 0 packets, 0 bytes; action: drop
QoS Set
dscp 3
Packets marked 0
Class-map: Gold (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 2
Police:
8000 bps, 2000 limit, 4000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: set-qos-transmit 4
violated 0 packets, 0 bytes; action: drop
QoS Set
precedence 5
5
Chapter 7
Marking Traffic
OL-7433-09

Advertisement

Table of Contents
loading

Table of Contents