Related Documentation - Cisco 10000 Series Configuration Manual

Per VRF AAA
Per VRF AAA
The per VRF AAA feature allows the Cisco 10000 series router to communicate directly with the
customer RADIUS server without having to go through a RADIUS proxy. Using the per VRF AAA
feature, you can partition authentication, authorization, and accounting (AAA) services based on a
virtual routing and forwarding (VRF) instance.
The Cisco 10000 series router supports the per VRF AAA feature in the following deployment models:
•
•
•
To support the per VRF AAA feature, AAA must be VRF aware. Define operational parameters for each
VRF and secure them to the VRF partitions, using a virtual template interface. For more information
about setting AAA parameters, see the
on page
For more information about the Per VRF AAA feature, see the Cisco 10000 Series Router Broadband
Aggregation, Leased-Line, and MPLS Configuration Guide.

Related Documentation

This section provides hyperlinks to additional Cisco documentation for the features discussed in this
chapter. To display the documentation, click the document title or a section of the document highlighted
in blue. When appropriate, paths to applicable sections are listed below the documentation title.
Feature
Class maps
DiffServ-Traffic Engineering (DS-TE)
MPLS
Cisco 10000 Series Router Quality of Service Configuration Guide
20-32
Managed L2TP Network Server
PPP Terminated Aggregation (PTA) to VRF
Remote Access (RA) to MPLS VPN
6-36.
Related Documentation
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
Part 8: Modular Quality of Service Command Line Interface > Configuring
the Modular Quality of Service Command Line Interface > Modular QoS CLI
Configuration Task List > Creating a Traffic Class
MPLS Traffic Engineering—DiffServ Aware, Release 12.2(14)S feature module
Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS
Configuration Guide
Configuring Remote Access to MPLS VPN
Multiprotocol Label Switching on Cisco Routers, Release 12.1(3)T feature module
MPLS Class of Service manual
Chapter 20 Configuring Quality of Service for MPLS Traffic
"Configuring RADIUS Attribute Accept or Reject Lists" section
OL-7433-09