Pvc Bundles; Bump Command - Cisco 10000 Series Configuration Manual

QoS Features, Commands, and Changes
Cisco IOS Release: Release 12.3(7)XI1
Description: This feature was modified on the PRE2 to provide strict priority queuing. To specify a
bandwidth rate for a strict priority queue, you must specify the police command.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

PVC Bundles

Documentation Reference:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

bump Command

Cisco IOS Release: Release 12.0(26)S
Description: The bump command was introduced on the PRE1 to configure the bumping rules for an
ATM PVC bundle or a specific ATM PVC bundle member.
Cisco 10000 Series Router Quality of Service Configuration Guide
1-50
Chapter 19, "Configuring Quality of Service for PVC Bundles"
bump Command, page 1-50
bump Command (Frame Relay VC-bundle-member), page 1-51
bundle Command, page 1-51
class-bundle Command, page 1-51
class-vc Command, page 1-51
dscp Command (Frame Relay VC-bundle-member), page 1-51
exp Command, page 1-51
frame-relay vc-bundle Command, page 1-51
mpls experimental Command, page 1-52
oam-bundle Command, page 1-52
precedence Command, page 1-52
precedence Command (Frame Relay VC-bundle-member), page 1-52
protect Command, page 1-52
protect Command (Frame Relay VC-bundle-member), page 1-52
pvc-bundle Command, page 1-53
pvc Command (Frame Relay VC-bundle), page 1-53
PVC Bundles Over ATM and Frame Relay Feature, page 1-53
ATM PVC Bundle Enhancement—MPLS EXP-Based PVC Selection Feature, page 1-53
Frame Relay PVC Bundles with QoS Support for IP and MPLS Feature, page 1-53
Chapter 1 Quality of Service Overview
OL-7433-09