Safety Considerations
WA R N I N G
C A U T I O N
WA R N I N G
C A U T I O N
Agilent 81950A Compact TLS module, First Edition
Initial Inspection
Inspect the shipping container for damage. If there is damage to the
container or cushioning, keep them until you have checked the contents of
the shipment for completeness and verified the instrument both
mechanically and electrically.
The Performance Tests give procedures for checking the operation of the
instrument. If the contents are incomplete, mechanical damage or defect
is apparent, or if an instrument does not pass the operator's checks, notify
the nearest Agilent Technologies Sales/Service Office.
To avoid hazardous electrical shock, do not perform electrical
tests when there are signs of shipping damage to any portion of
the outer enclosure (covers, panels, etc.).
You MUST return instruments with malfunctioning laser modules
to an Agilent Technologies Sales/Service Center for repair and
calibration.
Line Power Requirements
The Agilent 81950A Compact Tunable Laser Source modules operate when
installed in Agilent 8163A/B Lightwave Multimeters, Agilent 8164A/B
Lightwave Measurement Systems, and Agilent 8166A/B Lightwave
Multichannel Systems.
Operating Environment
The safety information in your mainframe's User's Guide summarizes the
operating ranges for the Agilent 81950A Compact Tunable Laser Source
modules. In order for these modules to meet specifications, the operating
environment must be within the limits specified for your mainframe.
Getting Started
13