Incoming Inspection - Agilent Technologies 42941A Operation And Service Manual

Installation Guide

Incoming Inspection

Incoming Inspection
Inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, it should be kept until the contents of the shipment have been
checked for completeness and the 42941A has been checked mechanically and
electrically. The shipment should contain everything listed in Table 1-1. If the
contents are incomplete or if there is mechanical damage or defect, notify the
nearest Agilent Technologies office. If the shipping container is damaged or the
cushioning material shows signs of unusual stress, notify the carrier as well as the
Agilent Technologies office. Keep the shipping materials for the carrier's
inspection.
Table 1-1 Contents
10
Description
Probe and Four-terminal Pair Connection Block
Pin Probe
Spare Pin Set (includes 3 spare pins)
a
3.5-mm Short
a
3.5-mm Load
Operation and Service Manual
BNC Adapter
Clip Lead
Ground Lead
Carrying Case
a. Not furnished with Option 001.
Agilent Qty.
Part Number
- 1
42941-60002 1
42941-60004 1
1250-2840 1
0955-1105 1
42941-90010 1
1250-1787 1
8121-0003 1
04193-61629 1
42941-60011 1
Chapter 1