Ipv6; Ip Mode - Cisco Small Business RV220W Administration Manual

Configuring Networking

IPv6

STEP 3
IPv6
STEP 4
STEP 5
Cisco RV220W Administration Guide
- Enter the Update Period in hours. This value is the interval at which the
router sends updates to the Dynamic DNS Service. The default value is
360 hours.
Click Save to save your settings, or click Cancel to reload the page with the
current settings.
The IPv6 configuration information for your RV220W is performed in several
windows in the Device Manager of the Cisco RV220W. Make sure you enable IPv4
and IPv6 Dual-Stack, configure the WAN, and configure the LAN.
• IPv6 WAN (Internet), page 40
• Configuring IPv6 LAN Properties, page 41
• Configuring IPv6 Static Routing, page 43
• Configuring IPv6-to-IPv4 Tunneling, page 45
• Configuring Router Advertisement, page 46
• RADVD Advertisement Prefixes, page 48

IP Mode

To open this page: In the navigation tree, click Networking > IPv6 > IP Mode.
Choose one of the following options:
• IPv4-only—Choose this option if your network supports only IPv4 devices
and does not require connectivity to IPv6 devices or networks.
• IPv4 and IPV6 Dual-Stack—Choose this option if your network supports
IPv6 devices or needs to connect to IPv6 devices or networks.
Click Save to save your settings, or click Cancel to reload the page with the
current settings.
If you changed the settings, click OK to allow the RV220W to reboot.
2
39