Using A Scsi Disk - Xante Accel a Writer 812 Manual

4. Double-click the Control Panel icon to open that window.
5. Double-click the Printers icon to open that window (fig. 6.15).
Default Printer
Apple LaserWriter II NT on LPT1
Installed Printers
Accel-a-Writer 812 on LPT1
Apple LaserWriter II NT on LPT1
PostScript Printer on LPT1
VariTyper VT-600 on LPT1
Use Print Manager
6. Click Accel-a-Writer 812 on LPT1... to select it.
7. Click Connect... (fig. 6.15). A window displays showing the
available interfaces.
8. Select the interface to which your printer is connected.
9. Click OK.
10. Close all open windows.
11. Resume the printing process in your application.

Using a SCSI Disk

The XANTÉ Accel-a-Writer 812 supports multiple SCSI disks of
unlimited size. In most cases, a 20 MB SCSI disk is large enough; it
typically has space for 500 to 600 fonts.
___________________________________
Set as Default Printer
Fig. 6.15 The Printers Window
Printers
Routine Operations 6-33
Cancel
Connect...
Setup...
Remove...
Add
Help