Xante Accel a Writer 812 Manual page 175

4. Select X•ACT... from the Controller menu. The following
screen appears.
5. Select the media size you are using from the Paper menu (Fig.
7.5).
6. Click Update/Print. A page prints with a horizontal and a
vertical line on it.
7. Measure the horizontal line. If it is shorter or longer than the
measurement to the right of the horizontal scroll bar (fig. 7.5),
adjust that bar until the measurement reads the exact line
length.
8. Measure the vertical line. If it is shorter or longer than the
measurement above the vertical scroll bar in figure 7.5, adjust
that scroll bar until the measurement reads the exact length of
the line.
9. Click Close when the horizontal and vertical line settings
match the lengths of their respective lines. You return to
Command Center's main screen.
7-14 Advanced Imagingbb
Fig. 7.5 The X•ACT Screen
___________________________________