Xante Accel a Writer 812 Manual page 268

FreeHand 4.0: Use the following procedure to change to the
required PPD.
1. Choose Print from the File Menu.
2. Click Print... in the lower left corner (not the upper right) of
the Print Dialog Box. The Print Options window appears.
3. Click Select PPD... A list of printers appears.
4. Locate the Accel-a-Writer 812 listing. It should appear at or
near the top of the list.
5. Click the Accel-a-Writer 812 driver. The pop-up menu closes.
6. Click the Paper: box and hold the mouse button down. A
pop-up menu appears with a list of available sizes. (The default
size is letter.)
7. Choose the desired size. The pop-up menu closes and the
selected size appears in the Paper: box.
8. Click the Halftone Screen box and hold the mouse button
down. A pop-up menu appears with available combinations of
lpi (lines per inch) screen rulings and printer resolutions.
Note: Selecting this resolution does not automatically change
9. Choose the desired lpi/resolution combination for the screen
from the Halftone Screens or choose the Other... selection and
enter your own choices. The pop-up menu closes and the
selected screen appears in the Halftone Screen box.
Note: To get the best results from the printout, choose
10. Click OK to verify selections. The Print dialog box reappears.
Your new selections appear in the dotted outline box at the
bottom of the Print dialog box.
____________________________________
the printer's resolution. You also should select the
printer's resolution through the printer's front panel.
Default from the Transfer Function pop-up menu.
Application Notes B-5