Xante Accel a Writer 812 Manual page 193

4. Clean any paper dust or paper residue from the anti-static teeth
using the following procedure:
a. Locate and remove the green cleaning brush inside the
right side of the printer (fig. 8.2).
b. Locate the anti-static teeth and slide the cleaning brush
back and forth across them several times to remove
residue (fig. 8.2).
c. Replace the brush in the right side of the printer.
5. Reinstall the toner cartridge or a new cartridge and close the
printer. (See "Installing the New Cartridge" in chapter 6 for
details.)
6. Reconnect the printer to the power source.
8-8 Maintenancebb
Fig. 8.2 Clean the Anti-Static Teeth
_______________________________________