Xante Accel a Writer 812 Manual page 107

3. Continue pressing the Menu
menu level or press the Reset
menu level and then press the Menu key
menu appears in the display window.
4. Press the Enter
options within the selected menu appears in the display
window.
Note: All options (which can be bottom level choices such as
5. Press the Menu
appears. If the option is not capitalized, go to step 6.
If the option is capitalized, it is already the current selection. If
you want to make further selections, go to step 7. If not, go to
step 8.
6. Press the Enter
is not a numeric value. If the option is a numeric value, use the
Test
the value to the desired amount; then, press the Enter
When selected, the name of the option changes from lowercase
letters to all capitalized letters. If you do not want to make
further selections, skip to step 8.
7. Use the Reset , Test
other desired options, repeating steps 2 and 6 until you make
all desired selections.
8. Press the On Line key to reset the printer and put it back on
line, ready for printing. READY/IDLE appears in the display
window.
For example, if you want to change the printer's resolution from
1200 x 1200 dpi to 600 x 600 dpi, do the following:
1. Make sure the printer is on and idle.
_______________________________________
key to select the desired menu. One of the
a resolution or submenus) within a menu level appear
when you scroll through the menu.
key until the desired submenu option
key to select the desired option if the option
key to lower the value or use the Menu
key if you are in the desired
key to back out to a previous
, Menu , and Enter
until the desired
key to raise
key.
keys to select
Configuration 5-9