Setting Up The Driver (Windows 3.1, 3.11, Or 95) - Xante Accel a Writer 812 Manual

12. Click CONTROL PANEL.
13. Double click Adobe PostScript Printers.
14. Click A: or B: drive in the left corner of the dialogue box,
depending on which drive you choose in step 3.
15. Double click the PPDS folder.
16. Select your XANTÉ Printer name in the Printer Descriptions
Available box.
17. Click INSTALL and wait until the program finishes running.
18. Click CLOSE.
19. Click PRINTERS. Your printer should show up in the printers
list.
Note: If your printer does not show up in the printers list,
20. Set the desired properties for the printer.
The new driver is installed. Before you can select the Accel-a-Writer
8200 in your Windows applications using this driver, you need to set
up the driver using the procedure in the next section.
Setting up the Driver (Windows 3.1, 3.11, or
95)
Use the following procedure to set up the Adobe Windows driver for
Windows 3.1, 3.11, or 95.
Note: Setting up the printer driver correctly is very important.
Incorrect setup could cause the printer to flush jobs.
1. Open Windows.
___________________________________________
restart Windows 95. The printer icon should then show
up in the PRINTERS group.
PC Setup 4-11