Miscellaneous Troubleshooting - Xante Accel a Writer 812 Manual

Miscellaneous Troubleshooting

This section covers miscellaneous troubleshooting except for print
quality. Print quality is covered in the next section.
§ The printer powers on, but no start-up page prints.
Possible Solutions:
_____________________________________ Troubleshooting 10-21
• The start-up page option may not be enabled. To
check this, press the Menu
SETUP:MISC appears in the display window. Press
the Enter key to enter the SETUP:MISC menu.
Then, if necessary, press the Menu
MISC:STARTUP PAGE appears in the display
window and press the Enter
If STARTUP PAGE:YES is capitalized, this feature
is already enabled; if so, press the On Line key and
skip to the next bullet item in this list. If not, press
the Enter key to select this option, and then press
the On Line key. Turn the printer off and back on;
the start-up page should print.
• Check the display window on the front panel for
messages.
• Make sure the toner cartridge is installed.
• Make sure that the source cassette or tray is selected
and it has media loaded. If you use a cassette, make
sure it is seated firmly in the printer.
• Remove the paper cassette from the printer. If there
is no front panel activity or engine light activity,
replace the paper cassette, turn the printer off and try
to start it again.
key until
key until
key.