Xante Accel a Writer 812 Manual page 274

2. Select Plot from the File menu. The Plot Configuration
window appears (fig. B.1).
Device and Default Information
AccelaWriter
Device and Default Selection...
Pen Parameters
Pen Assignment... Optimization...
Additional Parameters
Display
Extents
Limits
View
Windows
Views... Window...
3. Click Device and Default Selection.... A pop-up menu appears
with a list of available printers. Choose the printer you
configured with the ADI - 4.2 driver. The pop-up menu
disappears and the selected printer appears in the Plot
Configuration window.
4. Click Size in the Paper Size and Orientation box. A window
appears where you can enter or select the height and width of
the paper you are using.
5. Enter or select the width and height of the paper which you are
going to use respectively in the Width and height fields. Then,
click OK and the Plot Configuration window appears again.
6. Make sure Scale to Fit is selected in the Scale, Rotation, and
Origin box.
7. Select OK.
____________________________________
Plot Configuration
Hide Lines
Adjust Area Fill
Plot To File
File Name...
OK
Fig. B.1 The Plot Configuration Window
Paper Size and Orientation
Inches
Size...
MM
Plot Area 16.50 By 10.50
Scale, Rotation and Origin
Rotation and Origin...
Plotted Inches = Drawing Units
10.5
Scale To Fit
Plot Preview
Preview...
Cancel
Application Notes B-11
User
9
Partial Full
Help