The Startup Page Menu
The Startup Page menu, MISC:STRTUP PAGE, allows you to
enable (YES) or to disable (NO) the automatic printing of the
start-up page each time the printer is turned on. The factory default is
YES.
The Jam Recovery Menu
The Jam Recovery menu, MISC:JAM RECOVER, allows you to
enable (YES) or to disable (NO) the jam recovery feature of your
printer. This feature causes a jammed page to reprint after the jam is
cleared, and the remaining part of the job prints. If Jam Recover is
enabled, it works as long as you do not turn off the power to the
printer while removing the jam. The factory default is YES.
The Initial Job Menu
The Initial Job menu, MISC:INITIAL JOB, causes the printer to
execute a Sys/Start file, if one exists, on an external hard disk when
the printer is turned on. The options are YES to enable this feature
and NO to disable this feature. The factory default is YES.
The DPI Menu
The DPI menu, MISC:DPI, allows you to select the printing
resolution. The standard options are 600 x 600 dpi and 1200 x 1200
dpi resolutions. The factory default is 1200 x 1200 dpi.
_______________________________________
Configuration 5-13