Using A Paper Cassette - Xante Accel a Writer 812 Manual

Using a Paper Cassette

This section covers loading a cassette with laser quality or 20 lb
photocopier paper. See "Printing Transparencies," "Printing
Envelopes," and "Printing Labels" later in this chapter, for specific
guidelines when using those forms of media.
Use the following procedure to refill and use the paper cassette for
printing.
1. Pull the paper cassette straight out of the printer.
2. Prepare up to 250 sheets (approximately 1" [27 mm] or less) of
laser quality or 20 lb photocopier paper. To do this:
a. Make sure the paper meets all requirements listed in
"Selecting Media" earlier in this chapter.
b. Determine the printing side of the paper. Most packages
of paper have an arrow pointing in the direction of the
printing side on the wrapper.
c. Fan the paper to prevent it from sticking together, and
then align the edges to form a smooth stack.
d. Determine the leading edge of the paper. This varies
depending on the printing mode and paper size. See the
previous section, "Feeding Media to the Printer," to
determine the leading edge.
___________________________________ Routine Operations 6-9