The Main Menus - Xante Accel a Writer 812 Manual

2. Press the Menu
menu) appears in the display window.
3. Press the Enter
4. Press the Menu
window.
5. Press the Enter
6. Press the Menu
If DPI is capitalized, then 600 x 600 is already the default
resolution; skip to step 8.
7. Press the Enter
changes to all capital letters, DPI:600 600, in the display
window.
8. Press the On Line key. READY/IDLE appears in the display
window.
The printer now has 600 x 600 dpi selected as the default resolution.

The Main Menus

Your Accel-a-Writer 812 contains three main configuration menus
(fig. 5.2), the Miscellaneous (SETUP:MISC) menu, the Interface
(SETUP:I/F) menu, and the PCL5 (SETUP:PCL5) menu, which
allow you to configure your printer through the front panel. Each
main menu contains related submenus with specific options. For
example, the Interface menu contains the RS232 submenu, which in
turn includes baud rate and handshaking selections.
5-10 Configurationbb
key until SETUP:MISC (the Miscellaneous
key to select the Miscellaneous menu.
key until MISC:DPI appears in the display
key to enter the dpi menu.
key until dpi:600 600 appears, if necessary.
key to select dpi:600 600. The selection
______________________________________