Printing Envelopes - Xante Accel a Writer 812 Manual

• Avoid handling transparencies as much as possible to
prevent finger prints and scratches.
• Keep the paper path clean (see chapter 8 for details on
maintaining your printer). Because transparencies are
acetate and clear, any dust or dirt can scratch or reduce the
print quality.
• Load 50 sheets or less, making sure the stack does not
exceed the upper paper limit mark on the side of the fold
down tray.
• Load transparencies short edge first into the fold down
tray.
• Do not fan transparencies. This causes static build-up
which can cause jams.
• Try printing fewer transparencies at a time if jams occur
and remove each as it exits the printer. The more
transparencies loaded, the heavier the stack which could
cause the media to stick together. Removing transparencies
as soon as they print helps prevent static build-up when a
sheet slides out across the top of the previous sheet.
• Make sure to check for the correct printing side before
loading transparencies face up in the fold down tray. Most
brands label each transparency or mark the wrapper
accordingly.

Printing Envelopes

In its standard configuration, your printer runs up to 10 envelopes
automatically or you can print them individually using the fold down
tray.
If you run envelopes, keep the following in mind:
• Load envelopes face up with the stamp corners to the left
in the fold down tray.
6-16 Routine Operationsbb __________________________________