Printing Envelopes - Xante Accel-a-Writer 8200 Manual

• Avoid handling transparencies as much as possible to
prevent fingerprints and scratches.
• Keep the paper path clean (see chapter 8 for details on
printer maintaining). Because transparencies are acetate and
clear, dust or dirt can scratch or reduce the print quality.
• Load 50 sheets or less, making sure the stack does not
exceed the upper paper limit mark on the side of the fold
down tray.
• Load letter or A4 size media long edge first into the fold
down tray. Load legal, ledger, or A3 size media short edge
first into the fold down tray.
• Do not fan transparencies. This causes static buildups
which can cause jams.
• Try printing fewer transparencies at a time if jams occur
and remove each as it exits the printer. The more
transparencies loaded, the heavier the stack which could
cause the media to stick together. Removing transparencies
as soon as they print helps prevent static buildup when a
sheet slides out across the top of the previous sheet.
• Make sure to check for the correct printing side before
loading transparencies face down in the fold down tray.
Most brands label each transparency or mark the wrapper
accordingly.

Printing Envelopes

Although your printer is not designed to run large numbers of
envelopes, you can print them individually. Always use the fold
down tray when printing envelopes.
If you run envelopes, keep the following in mind:
• Load the envelope face down in the fold down tray. Check
your application to determine if the flap should be to the
left or right side.
6-16 Routine Operationsbb __________________________________