Setting Dual Lan Configuration - NEC Express 5800 User Manual

3-28 Windows Setup

SETTING DUAL LAN CONFIGURATION

The NEC Express5800/ft series builds a dual LAN configuration by using "Stratus emb-82559 10/100
Enet Adapter" (100Base) and "Stratus emb-82544GC Copper Gigabit Adapter" (1000Base) mounted
as standard on the PCI module.
TIPS:
This is a configuration which is required only when the keyboard is connected via SSU at
reinstallation. For other cases, this setting is not necessary, so proceed to the next setting.
To set dual LAN configuration, log on as "Administrator" or a member of the group
"Administrators".
Display the [Intel(R)PROSet II] dialog box.
1.
Start one of the start menu modes below:
2.
Standard start menu mode
Click [Intel(R)PROSet II] in [Control Panel] from the [Start] menu.
Classic start menu mode
(1) Select [Settings] - [Control Panel] from the [Start] menu.
(2) Double-click the [Intel(R)PROSet II] icon.
Select [Network Components] from
3.
Network Component Tree. The
pop-up menu appears. Select [Create
New Team...] → [Fault Tolerance].
IMPORTANT:
command other than [Fault Tolerance]
on the standard PCI module.
[Team #1: Adaptive Fault Tolerance
Mode] is added to Network
Component Tree.
Do not select the