NEC Express 5800 User Manual page 103

When starting Recovery Console from Windows Server 2003 CD-ROM
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD is set, reset the system (press Ctrl + Alt + Delete) or press the power
switch to power off and on to reboot the NEC Express5800/ft series.
(c) When the following message appears, press any key to start up from the CD-ROM.
IMPORTANT:
will be started up from a hard disk and Recovery Console will not be started.
(d) When the following message appears on the screen press F5 + F6 quickly.
IMPORTANT:
up. If the screen for selecting HAL as described in the step 3 does not appear, reboot
the system and start again from selection of an operating system.
3.
When you see the screen for selecting HAL, follow the steps below.
(a) Select "Other" (default) and press the [Enter] key.
Press any key while the message is displayed. Otherwise the system
Unless F5 + F6 keys are pressed, Recovery Console does not start
Troubleshooting 5-5