Backup Of System Information - NEC Express 5800 User Manual

4-20 Procedures after Completion of Installation

BACKUP OF SYSTEM INFORMATION

After setting up the system, back up the system information using the Off-line Maintenance Utility.
Without backup for system information, the information and settings that are specific to your server
cannot be restored if the server is repaired. Take the following steps to make a backup copy of the
system information:
1.
Get a 3.5-inch floppy disk.
2.
Insert the "NEC EXPRESSBUILDER" CD-ROM into the CD-ROM drive of the server, and
restart the system.
NEC EXPRESSBUILDER is activated and the [NEC EXPRESSBUILDER Top Menu] is
displayed.
Select [Tool] → [Off-line Maintenance Utility].
3.
4.
Select [Save System NVRAM/ROM Data] from [System Information Management].
Follow the instructions you see on the screen.