NEC Express 5800 User Manual page 60

3-20 Windows Setup
16. When message for inputting Windows Server 2003 product ID appears, enter the product ID.
Input the WindowsServer2003 ProductID.
Note: Hyphens must be inserted.
Input example: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
ProductID?
17. The confirmation message for input Windows Server 2003 product ID will appear.
When it is correct, enter "Y". If it is wrong, enter "N" and press Enter.
ProductID :
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
Are you sure (Y/N)?
18. The message for inputting the size of the partition to install the OS.
Enter the partition size and press Enter.
Refer to "Size of the Partition to be Created" in page 3-8 and be sure to
IMPORTANT:
specify more than the minimum required partition size. If you specify a partition size less than
the minimum size, the installation may fail.
Enter the size of the partition to create.
Note 1:The minimum partition size is 3072 MByte.
1GByte is 1024MByte.
Note 2:If a size larger the HDD capacity is specified,
the entire capacity of the HDD will be used.
Note 3:Input "ALL" to use the entire capacity of the HDD
for the system partition.
Desired Size (Unit: MByte)
19. The confirmation message for input size of the partition to install the OS will appear.
When it is correct, enter "Y". If it is wrong, enter "N" and press Enter.
The desired system partition size is XXXX.
Are you sure (Y/N)?
20. The following message will be displayed:
Copying Windows Server 2003 to the system drive. . .
Approximately 20 minutes.