NEC Express 5800 User Manual page 67

IMPORTANT:
closing the window, etc., the installation will be stopped. In such case, operations on Windows
will be possible, but modules or PCI boards will not be duplicated properly. If this happens, you
need to start over the ft series setup.
37. After restarting, the [Welcome to the Windows Setup Wizard] screen will appear.
Click [Next>] and follow the instruction of the wizard. After compling operations in the wizard,
the NEC Express5800/ft series will be restarted automatically.
IMPORTANT:
If you agree, click [I accept this agreement.] and click [Next>].
If you do not agree, click [I don't accept this agreement.] and click [Next>].
If you do not agree, the setup will be terminated and Windows will not be installed.
38. After the machine is restarted, it is automatically logged on using a user name of Administrator.
When the dialog below appears, read the information and click "OK".
IMPORTANT:
such case, change the "Colors" setting to "Medium (16 bit)" or higher.
[Display Properties] – [Settings] tab – [Color quality]
39. Update software programs
If you have performed installation using "NEC Express5800/ft series ft Update CD," apply all
update modules by referring to "ftcont_sw_vnn.doc " in the CD-ROM. However, it is unnecessary
to apply individual update modules here because the latest update module is automatically applied
from the NEC Express5800/ft series ft Update CD-ROM.
- ft control software (Ver:n.n) update module
Although NEC ESMPRO Agent is automatically installed at ft series setup, the latest module is not
applied. You need to apply an update module separately from NEC Express5800/ft series ft Update
CD.
Now the installation of Windows Server 2003 is complete.
Never terminate the above program while it is running. If it is terminated by
Read [License Agreement] thoroughly.
At the bottom right of the screen, "Display Settings" may be displayed. In
Windows Setup 3-27