NEC Express 5800 User Manual page 58

3-18 Windows Setup
Insert the "ft Update CD" into the CD-ROM drive and press Enter.
If you have an additional ft Update CD and wish to use it,
insert the CD-ROM into the CD-ROM drive.
Use an additional ft Update CD?[Y,N]?
Insert the ft Update CD into the CD-ROM drive and press ENTER.
10. "Important 1" message will appear.
Read the message and follow the instructions.
*** Important 1
- Confirm that there are no optional boards installed into the
PCI module.
If there are optional boards installed into the PCI module,
terminate the installation process and remove the boards,
and then restart the installation process.
Caution: When optional boards are installed into the PCI module,
the installation process will not complete properly.
Terminate installation?[Y,N]?
11. "Important 2" message will appear.
Read the message and follow the instructions.
*** Important 2
- Confirm that only 1 Hard Disk Drive is inserted into the PCI module
(Group1).
If there is more than 1 Hard Disk Drive in the PCI module (Group1),
terminate the ft series setup, and remove all of the Hard Disk Drives,
leaving only the Hard Disk Drive inserted into slot 1 of the PCI module
(Group1).
Caution: If you continue installation will multiple Hard Disk Drives
inserted, the server will not be able to determine the
destination of the installation, and may result in an improper
installation.
Terminate installation? [Y,N]?