NEC Express 5800 User Manual page 113

a-5. The message of update completion will be displayed.
"[Update of the driver Completi
Press any key and termina
b) When N8803-002 (SCSI Controller) is connecte
b-1. Execute [Command Promp
b-2. Run the following command from Command Prompt and move to CD-ROM
drive.
C:\> CD-ROM drive:
b-3. Run the f ollowing command from Command Prompt and move to the folder
with the batch file.
CD-ROM drive:\> cd\WINNT\DOTNET\EN
b -4. Run the following command from Command Prompt for u
CD-ROM drive:\WINNT\ DOTNET\EN > N8803
b -5. The message of update completio
"[Update of the driver Comp
Press any key and terminate."
c) When N8803-031F (Fibre Channel Controller) is connected
c-1. Start up [Device Mana
Tool] - [Computer Management].
Check to see [Qlogic
[SCSI and RAID Controllers].
You do not need to perform the steps c-2 and later if the number of [Qlogic
QLA23xx PCI Fibre Channel Adapter]s shown is identical to number of
actually implemented [Qlogic QLA23xx PCI Fibre Channel Adapter]s. If not,
go to c-2.
c-2. Right-click the [Unknown Device] – [Fibre Channel Controller] on the [Device
Manage r], and select [Update Driver].
Install from a list of specific location (Advanced)
c-3. Select [
[Next].
Don't search. I will choose the driver to install
c-4. Select [
[Next].
c-5. Select [SCSI and RAID Controllers], and then click [Next].
c-6. Do not select a driver on the model list. Click [Hav
c-7. Insert NEC EXPRESSBUILDER into the CD-ROM drive and click [Browse].
Specif y the "CD-ROM drive:\WINNT\DRIVERS\QL2300" folder in the
"Copy manufacture's files from:" column, and then click [OK].
c-8. Select [Qlogic QLA23xx PCI Fibre Channel Adapter] on the model list and
click [Next].
c-9. A warning messag
continue. The driver will be installed. During the processing, the mouse cursor
may not be moved for 10 to 20 seconds. Please wait.
c-10. Click [Finish].
c-1 . Check to see that the number of [Qlogic QLA23xx PCI Fibre Channel 1
Adapter]s shown is identical to number of
QLA23xx PCI Fibre Channel
d) W hen N8104-84 (1000B
d-1. Execute [Command Prompt].
on]
te."
t].
n will be displayed.
letion]
ger] by selecting [Start]- [Programs] - [Administrative
QLA23xx PCI Fibre Channel Adapter] appears under
e tells that you are about to update a driver. Click [Yes] to
Adapter]s. If not, repeat the steps 2 to 10.
ASE-SX Adapter) is connected
Troubleshooting
d
pdating the driver.
002.BAT
], and then click
.
], and then click
e Disk...].
actually implemented [Qlogic
5-15