NEC Express 5800 User Manual page 37

A tower model is shown here for convenience of explanation. However, the steps are the same for a
rack-mount model except that its modules are mounted horizontally.
IMPORTANT:
Place the USB floppy disk drive on top of the tower cabinet. However, to place it
on a rack-mount model, put a distance of one unit between the disk drive and the module.
To a SCSI
backup device
To a 1000Mbps
network
To a 100Mbps
network
Display
IMPORTANT:
Connection of optional devices
In the case of standard configuration, you need to complete setup of the operating system
before mounting optional PCI cards or hard disks that you bought separately.
In the case of "Build-to-Order" configurations, if N8803-030 or 031 is mounted, be sure to
connect cables to the additional cabinets before going on to the next steps.
USB floppy
disk drive
2
1
A
B
Keyboard (via keyboard hub to mouse)
Setup 2-9
Reserved for
maintenance
Reserved for
maintenance