NEC Express 5800 User Manual page 77

4.
Enter the location, where debug
information is to be written, in the text box.
When writing debug information under th
file name "MEMORY.DMP" in the D
drive:
D:\MEMORY.DMP
This server has the following location as a
default value for installation. It is
recommendable to store file in this default
location.
%SystemDrive%\NECDump\MEMORY.
DMP
IMPORTANT:
[Full Memory Dump] should be specified for writing debug information. However, if
the mounted memory size is over 2GB, specify [Kernel Memory Dump]; you canno
specify [Full Memory Dump
Specify a drive which has a free space of the size of memory in the NEC
Express5800/ft series + 12MB or more.
If the memory will be expanded to larger than 2 GB, change Write Debugging
Information to [Kernel Memory Dump] before expanding the memory. Size of the
debugging information (memory dump) to be collected will change due to memory
increase. Check how much free space the disk to which debugging information is
written has.
Procedures after Completion of Installation
e
]
4-3
t