Starting Up Recovery Console - NEC Express 5800 User Manual

5-4 Troubleshooting

Starting up Recovery Console

You can start up Recovery Console in two ways:
•
Start up Recovery Console installed on the system.
•
Start up Recovery Console from the Windows Server 2003 CD-ROM.
Installing Recovery Console on the system
1.
Start up the NEC Express5800/ft series and log on to Windows Server 2003.
2.
Insert the Windows Server 2003 CD-ROM into the drive.
3.
From [Start] of the taskbar, select [Run...] to run
CD-ROM drive:\i386\winnt32.exe /cmdcons /syspart:c: /tempdrive:c:
4.
Follow the messages that appear on the screen to continue.
Starting up the Recovery Console
1.
Modify the BIOS settings.
Select [Advanced] → [Monitoring Configuration] and "Disable" the settings of [Boot
Monitoring]. For more information, see "
FUNCTION ~CHANGING BIOS SETTINGS~"
2.
Power on the system.
When starting up Recovery Console installed on the system
(a) Select Microsoft Window Recovery Console in "Please select the operating system to
start:".
Please select the operating system to start:
Windows Server 2003, Enterprise
Microsoft Windows Recovery Console
(b) When the following message appears on the screen press F5 + F6 quickly.
IMPORTANT:
up. If the screen for selecting HAL as described in the step 3 does not appear, reboot
the system and start again from selection of an operating system.
SWITCHING BOOT MONITORING
Unless F5 + F6 keys are pressed, Recovery Console does not start
in Chapter 3.