NEC Express 5800 User Manual page 93

System Requirement
The hardware and software environment in which NEC MWA runs is:
•
Management PC (to install NEC MWA)
NEC MWA runs on a computer where Windows is operated. For more information, see "MWA
First Step Guide."
•
The servers that can be maintained remotely by NEC MWA
Servers which the User's Guide provided with NEC Express5800/ft series includes descriptions
of NEC MWA. The servers are equipped with RomPilot or BMC. This product is has with BMC
(IPMI1.0) and RomPilot.
Installation of NEC MWA Manager
To mange this product using NEC MWA, install NEC MWA Manager on the management PC. Use the
"NEC EXPRESSBUILDER" CD-ROM to install NEC MWA Manager.
1.
Start up Windows.
TIPS:
For OS compatibility, see "MWA First Step Guide".
CR-ROM drive: \mwa\doc\jp\mwa_fsg.pdf
2.
Insert the "EXPRESSBUILDER" CD-ROM into the CD-ROM drive.
Master Control Menu of NEC EXPRESSBUILDER will be automatically displayed.
3.
Click [Setup], then [MWA].
TIPS:
You can also display the popup menu by
right-clicking the screen shown right.
4.
Click [NEC MWA Manager].
NEC MWA installer starts up. Follow the instructions to install.
Procedures after Completion of Installation 4-19