NEC Express 5800 User Manual page 79

8.
Change the value set for [Initial Size] in the
[Paging file size for selected drive] box to the
[Recommended] value or more, and then click
[Set].
IMPORTANT:
Be sure to create the file in the above size in the OS partition. If a value smaller than the
[Recommended] value is set for [Initial Size] of the paging file, accurate debu
information (memory dump) may not be collected
For the [Recommended] value, see "Size of the Partition to be Created" in Chapter 3
To be prepared for failure, it is recommended to press the dump button to see if th
memory dump can be collected in normally beforehan
If the memory has been expanded re-set the paging file according to the memory siz
9.
Click [OK].
A message is displayed asking you to restart the system depending on the changed settings.
Restart the system according to the messages.
Procedures after Completion of Installation
.
d.
4-5
g
.
e
e