System Update - NEC Express 5800 User Manual

4-12 Procedures after Completion of Installation
7.
Terminate the network setup.
IMPORTANT:
If the SNMP Service is added after adaptation of the service pack in installation of OS,
adapt the service pack again. If not, the SNMP Service may not operate correctly. Thi
then disables NEC ESMPRO Agent to be operate
The SNMP Service is required for operating NEC ESMPRO Agent. If the SNMP
Service is deleted after the installation of NEC ESMPRO Agent, install the SNMP
Service and then reinstall NEC ESMPR
Some software products provided by other vendors use the SNMP Service. If the
SNMP Service and NEC ESMPRO Agent are installed in the system in which such
software as above is installed, it may be impossible to start NEC ESMPRO Agent
services. If so, delete the SNMP Service once and install the service again. After which
reinstall NEC ESMPRO Agent and the other vendor's so

System Update

To install NEC ESMPRO Agent, necipmi.sys needs to be installed in advance. For the installation of
necipmi.sys, use the NEC EXPRESSBUILDER CD-ROM shipped with the system to update the
system. (see page 5-11).
If necipmi.sys is not installed yet, the message shown below appears and the setup of NEC ESMPRO
Agent is suspended.
"NEC ESMPRO Agent requires the following file.
Please update NEC Express5800 system before installing NEC ESMPRO Agent.
necipmi.sys"
d.
O Agent.
ftware.
s
,