NEC Express 5800 User Manual page 106

5-8 Troubleshooting
5.
When you start up Recover Console from Windows Server 2003 CD-ROM, the following
message appears. Press the R key to boot Recover Console.
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) to run on your computer.
- To set up Windows now, press ENTER.
- To repair a Windows installation using
Recovery Console, press R.
- To quit Setup without installing Windows, press F3.
IMPORTANT:
the Recovery Console installed on the system.
6.
Follow the messages on the screen to start up the Recovery Console.
IMPORTANT:
When you restored a damaged file using the Recovery Console, update the system
described in the next section
If you run the system without restoring files, modify the BIOS settings. Se
[Advanced] → [Monitoring Configuration] and "Enable" the settings of [Boo
Monitoring]. For more information, see "SWITCHING BOOT MONITORIN
FUNCTION ~CHANGING BIOS SETTINGS~" in Chapter 3.
The message shown above does not appear when you have started up
lect
t
G