NEC Express 5800 User Manual page 112

5-14 Troubleshooting
8.
Start Device Manager, choose the [View]-[Device by connection] and do the followings:
a) Delete the red-circled device entries in the following figure.
IMPORTANT:
which appears as child entries of "ACPI Multiprocessor ftServer".
Delete the following device entries:
- StratusDual Initiated Disk Device
- StratusDual Initiated Disk Device
- Stratus Fault Tolerant 69000 Video
- ! Unknown Device
a-1. Select the device and right-click. Choose [Remove
a-2. After the dialog box of "Confirm Device Removal" is displayed, confirm the device
name and then click on "OK
9.
When the option board is connected, perform the following operations for each option.
Use the CD-ROM you used in step 5 and perform theses operations:
a) When
a-1. Execute [Command Promp
a-2. Run the following command from Command Prompt and move to CD-ROM
drive.
C:\> CD-ROM drive:
a-3. Run the f
with the batch file.
CD-ROM drive:\> cd\WINNT\DOTNET\EN
a-4. Run the following command from Command Prompt fo
CD-ROM drive:\WINNT\DOTNET\EN> N8804001.BAT
Do not uninstall entries for "Stratus Fault Tolerant 69000 Video"
N8804-001P1 (100BASE-TX Adapter) is connected
ollowing command from Command Prompt and move to the folder
".
t].
].
r updating the driver.