NEC Express 5800 User Manual page 63

automatically. There is no user intervension.
The following settings are made automatically:
[Collecting information]→[Dynamic Update]→[Preparing installation]→
[Installing Windows]→[Finalizing installation]
When restarting, the message "Press any key to boot from CD." will appear,
IMPORTANT:
but do not perform any operations.
29. The system will be automatically rebooted. No user intervension is required.
IMPORTANT:
When rebooting, the message "Press any key to boot from CD." will appear, but do not
perform any operations.
The selection of "Previous Operating System C:" may be displayed on the OS selection
screen. Do not select it. Selecting "Previous Operating System C:" will display black screen
and the process will be stopped. In such case, press CTRL + ALT + DELETE to restart the
system. After the system is rebooted, the installation will be continued.
30. After the system is rebooted, the following message will appear and the instllation will be
continued. The system configuration is done automatically. Do not perform any operations.
Express5800/ft series clear installation
** Please do not perform any operations.
** The system will restart automatically.
Configuring System.
The system will automatically restart in approximately 2 minutes.
*** Setting [ft server environment] ***
*** Checking [disk space] ***
The system will automatically restart in approximately 10 minutes.
Never terminate the above program while it is running. If it is terminated by
IMPORTANT:
closing the window, etc., the installation will be stopped. In such case, operations on Windows
will be possible, but each module or PCI board will not be duplicated properly. If this happens,
you need to start over ft series setup.
**
**
Windows Setup 3-23